Amana NFW5800H Common Problems & Recalls
This page covers the Amana NFW5800H, a 4.3 cu ft front load washer first listed with ENERGY STAR in 2018-12. It lists the failure modes the machine is actually built to have — the parts Amana publishes replacements for — plus the recall status and whether a repair is worth the money.
Recall status
No public recall record for this model. We check the CPSC recall database for the brand and model string. No record means no recall has been published for the NFW5800H — it does not mean the design is flawless. If a recall is issued later, it will appear here.
What actually fails on this machine
Amana publishes 10 replacement parts for the NFW5800H. That list is the honest answer to “what goes wrong”: a part only gets a published replacement number if people are buying it. These are the categories:
| System | What you notice | Typical repair |
|---|---|---|
| Hose Clamp | Small leak at hose connection | Replace the part; check the harness and connector at the same time |
| Bellow | Component failure | Replace the part; check the harness and connector at the same time |
| Lid Lock / Latch | Washer will not start | Replace the part; check the harness and connector at the same time |
| Door Strike | Door will not stay closed | Replace the part; check the harness and connector at the same time |
| Affresh Washing Machine Cleaner Tablets 6 Count | Component failure | Replace the part; check the harness and connector at the same time |
| Valve | Component failure | Replace the part; check the harness and connector at the same time |
| Door Boot Seal | Water leaks from door | Replace the part; check the harness and connector at the same time |
These are the failure paths this model is provisioned for, not a count of complaints. We do not publish invented failure rates.
Error codes this family reports
Amana does not publish error-code definitions for the NFW5800H in the owner's manual, so we do not list any for it. The codes below belong to the same washer platform and are documented for sibling models — treat them as indicators of what this machine may report, not as a confirmed code list.
Is it worth repairing?
The rule most appliance technicians use: if the repair costs more than half the price of a new machine, and the washer is over eight years old, replace it. Two specific cases change that maths.
- A shaking or noisy washer is often a levelling or installation problem, not a part. Fix that first — it costs nothing.
- A washer that will not drain is usually a blocked hose, which is also free to check.
- A control board or sealed drum failure is where the maths usually says replace the machine.
When it is a technician job, not a DIY job
Stop and call a licensed technician if any of these apply:
- The machine has a burning smell, scorch marks or a tripping breaker.
- Water has reached the control board or any mains wiring.
- The repair needs the drum, transmission or tub seal opened up.
- The appliance is gas-fired and the fault is anywhere near the gas train.
- You are not confident working with 120 V wiring while standing on a wet floor.
Sibling models with the same platform
More for the NFW5800H
Where this data comes from
- Recall databasehttps://www.cpsc.gov/Recallschecked 2026-10-26
- Error code definitionshttps://producthelp.whirlpool.com/Product_Help_Page?model=NFW5800HW0checked 2026-10-26
- Replacement partshttps://www.partselect.com/Models/NFW5800H/checked 2026-10-26
3 separate sources are listed above; each field on this page traces to one of them. We publish facts we can point to — no republished manual text, no hosted PDFs, no invented model numbers or error codes.