Maytag MHW5630M Manual, Specs, Parts & Error Codes
The Maytag MHW5630M is a front load automatic washer with a 4.5 cu ft (127 L) drum. It runs on 120V and uses about 86 kWh of electricity and 4,267 gallons of water per year. We track 1 replacement part numbers and no error codes are published in its owner’s manual.
Listed with ENERGY STAR since 2022-07. This is not a connected model.
Specifications
- Model
- MHW5630M
- Brand
- Maytag
- Type
- Front Load washer
- Capacity
- 4.5 cu ft (127 L)
- Width
- 27 in
- Voltage
- 120V
- Annual energy
- 86 kWh
- Annual water
- 4,267 gal
- IMEF
- 2.92
- IWF
- 3.2
- Connected
- No
Inches for dimensions, US cubic feet with litres in brackets. Energy figures are the manufacturer's certified values as filed with ENERGY STAR.
Full breakdown →Official manual
Maytag does not publish a direct PDF link for the MHW5630M. The manual is served from a model lookup page, and it only works with the full model number including the suffix — for this model that is MHW5630MBK0.
Entering the base number alone returns “model not found”, which is the single most common reason people cannot find their manual.
Look up the manual on MaytagManual details, what it covers, and what to do if it is missing →
Common faults & error codes
Maytag does not publish error-code definitions for the MHW5630M in the owner's manual. Codes for this platform live in the service documentation, which is issued to authorised technicians only — so we do not guess at them.
What we can do is map the symptom. The codes that appear on this washer family are documented for other models on the same platform:
- F1E1The main control board (ACU) reported an internal fault.
- F2E3The user interface and the main control board failed to initialize together.
- F3E1The washer cannot read the water level.
- F5E2The lid lock will not engage.
- F5E3The lid lock will not release.
- F6E2The user interface panel cannot talk to the main control board.
Browse all Maytag error codes →
Replacement parts
| Part | Part number | Typical symptom |
|---|---|---|
| Lid Lock / Latch | W11565030 | Washer will not start, will not spin |
Part numbers are the manufacturer's own numbers, published so you can verify a part before ordering. We do not sell parts.
Part details and where to buy →Recalls
No public recall record is on file for the MHW5630M. We check the CPSC recall database; a model with no record means no recall has been published, not that the machine is fault-free.
Common problems and recall status →Other Maytag washers
- Maytag MHW3500F — 4.5 cu ft front load
- Maytag MHW5630H — 4.5 cu ft front load
- Maytag MHW8150E — 4.5 cu ft front load
- Maytag MHW6630H — 4.8 cu ft front load
- Maytag MHW6630M — 4.8 cu ft front load
- Maytag MFW7020R — 5 cu ft front load
Where this data comes from
- Specificationshttps://data.energystar.gov/resource/bghd-e2wd.jsonchecked 2026-10-26
- Part numbershttps://www.partselect.com/Models/MHW5630M/checked 2026-10-26
2 separate sources are listed above; each field on this page traces to one of them. We publish facts we can point to — no republished manual text, no hosted PDFs, no invented model numbers or error codes.
Frequently asked
Where is the MHW5630M manual?
Maytag publishes the manual behind a model lookup. Enter the full model number MHW5630MBK0 including the suffix on the manufacturer's support page.
What is the capacity of the MHW5630M?
4.5 cu ft (about 127 litres), front load configuration.
What parts fail most on the MHW5630M?
The replacement parts listed on this page are the ones Maytag publishes for this model, including lid lock / latch.