Model Number Finder

Whirlpool WFW7540F Manual, Specs, Parts & Error Codes

The Whirlpool WFW7540F is a front load automatic washer with a 4.5 cu ft (127 L) drum. It runs on 120V and uses about 88 kWh of electricity and 4,210 gallons of water per year. We track 10 replacement part numbers and no error codes are published in its owner’s manual.

Listed with ENERGY STAR since 2016-06. This is not a connected model.

Specifications

Model
WFW7540F
Brand
Whirlpool
Type
Front Load washer
Capacity
4.5 cu ft (127 L)
Width
27 in
Voltage
120V
Annual energy
88 kWh
Annual water
4,210 gal
IMEF
2.92
IWF
3.2
Connected
No

Inches for dimensions, US cubic feet with litres in brackets. Energy figures are the manufacturer's certified values as filed with ENERGY STAR.

Full breakdown →

Official manual

Whirlpool does not publish a direct PDF link for the WFW7540F. The manual is served from a model lookup page, and it only works with the full model number including the suffix — for this model that is WFW7540FW0.

Entering the base number alone returns “model not found”, which is the single most common reason people cannot find their manual.

Look up the manual on Whirlpool

Manual details, what it covers, and what to do if it is missing →

Common faults & error codes

Whirlpool does not publish error-code definitions for the WFW7540F in the owner's manual. Codes for this platform live in the service documentation, which is issued to authorised technicians only — so we do not guess at them.

What we can do is map the symptom. The codes that appear on this washer family are documented for other models on the same platform:

Browse all Whirlpool error codes →

Replacement parts

Safety: unplug the washer and shut off both water valves before replacing any part. Parts behind the control console carry mains voltage.
PartPart numberTypical symptom
Drain PumpWPW10605427Washer will not drain, standing water
Hose ClampWP596669Small leak at hose connection
HingeWPW10208415—
Front Load Washer BellowW11106747—
Detergent DispenserWPW10365885Detergent not dispensing
Hose ClampWP285655Small leak at hose connection
Dryer CapWPW10208398—
Water Level SwitchWPW10448876—
Lid Lock / LatchWP3359452Washer will not start
Lid Lock / LatchWPW10443885Washer will not start

Part numbers are the manufacturer's own numbers, published so you can verify a part before ordering. We do not sell parts.

Part details and where to buy →

Recalls

No public recall record is on file for the WFW7540F. We check the CPSC recall database; a model with no record means no recall has been published, not that the machine is fault-free.

Common problems and recall status →

Other Whirlpool washers

Where this data comes from

2 separate sources are listed above; each field on this page traces to one of them. We publish facts we can point to — no republished manual text, no hosted PDFs, no invented model numbers or error codes.

Frequently asked

Where is the WFW7540F manual?

Whirlpool publishes the manual behind a model lookup. Enter the full model number WFW7540FW0 including the suffix on the manufacturer's support page.

What is the capacity of the WFW7540F?

4.5 cu ft (about 127 litres), front load configuration.

What parts fail most on the WFW7540F?

The replacement parts listed on this page are the ones Whirlpool publishes for this model, including drain pump, hose clamp, hinge.