Whirlpool WTW8000D Manual, Specs, Parts & Error Codes
The Whirlpool WTW8000D is a top load automatic washer with a 5.3 cu ft (150 L) drum. It runs on 120V and uses about 196 kWh of electricity and 6,698 gallons of water per year. We track 10 replacement part numbers and 12 confirmed error codes for this model.
Listed with ENERGY STAR since 2016-06. This is not a connected model.
Specifications
- Model
- WTW8000D
- Brand
- Whirlpool
- Type
- Top Load washer
- Capacity
- 5.3 cu ft (150 L)
- Width
- 27 in
- Voltage
- 120V
- Annual energy
- 196 kWh
- Annual water
- 6,698 gal
- IMEF
- 2.06
- IWF
- 4.3
- Connected
- No
Inches for dimensions, US cubic feet with litres in brackets. Energy figures are the manufacturer's certified values as filed with ENERGY STAR.
Full breakdown →Official manual
Whirlpool publishes the owner's manual for the WTW8000D as a PDF on its own support site. The button below opens the manufacturer's file directly — we do not host, copy or mirror it.
Open the official Whirlpool manual (PDF)Link goes to s3.amazonaws.com, the manufacturer's own file host.
Manual details, what it covers, and what to do if it is missing →
Common faults & error codes
The WTW8000D service documentation lists 12 error codes. Each one below has its own page with the meaning, likely causes and safe checks.
- F1E1The main control board (ACU) reported an internal fault.
- F2E5The user interface panel and the main control board do not match.
- F3E1The washer cannot read the water level.
- F5E2The lid lock will not engage.
- F5E3The lid lock will not release.
- F6E2The user interface panel cannot talk to the main control board.
- F6E3Same communication failure as F6E2 — the UI and main control board are out of sync.
- F8E1The washer is taking too long to fill.
- F8E6The lid was left open.
- F9E1The washer is taking too long to drain.
- LFLong Fill.
- drDrain problem — the washer cannot empty the drum in the time allowed.
Replacement parts
| Part | Part number | Typical symptom |
|---|---|---|
| Suspension Rod Kit | W10780048 | Washer shakes or bangs in spin |
| Lid Lock / Latch | W10810403 | Washer will not start, will not spin |
| Hose Clamp | WP285655 | Small leak at hose connection |
| Water Inlet Valve | W11220230 | Washer will not fill |
| Washplate | W10752187 | Poor cleaning, no agitation |
| Impact Absorber | WP8564458 | Washer is loud in spin |
| Drain Hose | W11244231 | Water leaks, will not drain |
| Washplate | W10752283 | Poor cleaning, no agitation |
| Lid Lock / Latch | W10734521 | Washer will not start, will not spin |
| Drain Pump | W10876600 | Washer will not drain, standing water |
Part numbers are the manufacturer's own numbers, published so you can verify a part before ordering. We do not sell parts.
Part details and where to buy →Recalls
No public recall record is on file for the WTW8000D. We check the CPSC recall database; a model with no record means no recall has been published, not that the machine is fault-free.
Common problems and recall status →Other Whirlpool washers
- Whirlpool WTW500CM — 5.3 cu ft top load
- Whirlpool WTW6150P — 5.3 cu ft top load
- Whirlpool WTW6157P — 5.3 cu ft top load
- Whirlpool WTW7120H — 5.3 cu ft top load
- Whirlpool WTW8120H — 5.3 cu ft top load
- Whirlpool WTW8127L — 5.2 cu ft top load
Where this data comes from
- Specificationshttps://data.energystar.gov/resource/bghd-e2wd.jsonchecked 2026-10-26
- Part numbershttps://www.partselect.com/Models/WTW8000D/checked 2026-10-26
- Error codeshttps://s3.amazonaws.com/sm-backend-production-attachments/owners-manual-W10607424-RevB.pdfchecked 2026-10-26
3 separate sources are listed above; each field on this page traces to one of them. We publish facts we can point to — no republished manual text, no hosted PDFs, no invented model numbers or error codes.
Frequently asked
Where is the WTW8000D manual?
The official Whirlpool owner's manual is published by the manufacturer. Use the manual button on this page to open it directly from Whirlpool.
What is the capacity of the WTW8000D?
5.3 cu ft (about 150 litres), top load configuration.
What parts fail most on the WTW8000D?
The replacement parts listed on this page are the ones Whirlpool publishes for this model, including suspension rod kit, lid lock / latch, hose clamp.