Whirlpool WFH5424S Common Problems & Recalls

This page covers the Whirlpool WFH5424S, a 2.8 cu ft front load washer first listed with ENERGY STAR in 2025-09. It lists the failure modes the machine is actually built to have — the parts Whirlpool publishes replacements for — plus the recall status and whether a repair is worth the money.

Recall status

No public recall record for this model. We check the CPSC recall database for the brand and model string. No record means no recall has been published for the WFH5424S — it does not mean the design is flawless. If a recall is issued later, it will appear here.

What actually fails on this machine

We do not have a verified part list for the WFH5424S, so we will not describe its failure modes. Start from the symptom guides instead — they apply across the washer family.

Error codes this family reports

Whirlpool does not publish error-code definitions for the WFH5424S in the owner's manual, so we do not list any for it. The codes below belong to the same washer platform and are documented for sibling models — treat them as indicators of what this machine may report, not as a confirmed code list.

F1E1 The main control board (ACU) reported an internal fault
F2E5 The user interface panel and the main control board do not match
F3E1 The washer cannot read the water level
F5E2 The lid lock will not engage
F5E3 The lid lock will not release
F6E2 The user interface panel cannot talk to the main control board
F6E3 Same communication failure as F6E2 — the UI and main control board are out of sync
F8E1 The washer is taking too long to fill
F8E6 The lid was left open
F9E1 The washer is taking too long to drain
LF Long Fill
dr Drain problem — the washer cannot empty the drum in the time allowed
drn Drain problem, long form of the same display message as dr

Is it worth repairing?

The rule most appliance technicians use: if the repair costs more than half the price of a new machine, and the washer is over eight years old, replace it. Two specific cases change that maths.

A shaking or noisy washer is often a levelling or installation problem, not a part. Fix that first — it costs nothing.
A washer that will not drain is usually a blocked hose, which is also free to check.
A control board or sealed drum failure is where the maths usually says replace the machine.

When it is a technician job, not a DIY job

Stop and call a licensed technician if any of these apply:

The machine has a burning smell, scorch marks or a tripping breaker.
Water has reached the control board or any mains wiring.
The repair needs the drum, transmission or tub seal opened up.
The appliance is gas-fired and the fault is anywhere near the gas train.
You are not confident working with 120 V wiring while standing on a wet floor.

Sibling models with the same platform

More for the WFH5424S

How the WFH5424S differs from its closest siblings

These are the models most often confused with the WFH5424S. The differences below are computed from our own records, not copied from a marketing sheet.

vs WFW4090N

0.8 cu ft smaller drum (2 vs 2.8)
2.3000000000000007 in deeper/taller (26 vs 23.7 in)
14 kWh/yr more energy (94 vs 80)
140 gal/yr less water (2,503 vs 2,643)
0 variants listed for the WFW4090N vs 1 here

Shared: both front load.

vs WFW4720R

1.7 cu ft larger drum (4.5 vs 2.8)
3.3000000000000007 in deeper/taller (27 vs 23.7 in)
60 kWh/yr more energy (140 vs 80)
1,605 gal/yr more water (4,248 vs 2,643)
10 part numbers fit only the WFW4720R

Shared: both front load.

Where this data comes from

Recall databasehttps://www.cpsc.gov/Recallschecked 2026-10-26
Error code definitionshttps://producthelp.whirlpool.com/Product_Help_Page?model=WFH5424SW0checked 2026-10-26

2 separate sources are listed above; each field on this page traces to one of them. We publish facts we can point to — no republished manual text, no hosted PDFs, no invented model numbers or error codes.